Invivo 3150M MRI Patient Mo...

Product details

Voltage : 100-120/200-240v  50/60 Hz

Short description……………….

.        Sale is for USED imaged items only.

.    Comes with a stand (4ft long and 18 inch wide)

.    Has a crack on top of the REMOTE display monitor Model 3155 MVS (image 12)

.    ECG parameter is working fine.

.    BP is being measured as intended. 

.    SpO2 sensor doesn't have a finger grip sensor so it records low SpO2 signals occasionally.

.    SpO2 Red Signal intensity is intermittent so we are uncertain about it's functionality but pretty sure it would be fine with Grip sensor as we have measured by pressing against the finger tip!

.    We were unable to synchornize  the remote display to the main machine, although independently both are working seamlessly. 

.    Feet are intact.

.    No sign of scratches on the LCD Display.

.    Comes with a stand. The stand is upright and doesn't have a crack or bend.

     Comes with Accessories which include:

*2X 3150 AC Power Adapter LOT# 487370.

*1X CV MRI High Impedance ECG Lead wires Part# 9218A Lot# 101612

*1X SpO2 Cable (missing finger grip ) REF# 9399A 

* 1 x NBP Hose without cuff 

*1X RF Antenna 

*2X AMP Cables.

*1X Stand Ref# 9029 Lot# 485150

 Package includes:

Invivo 3150M MRI Patient Monitor

2 x Invivo 3150 series AC Adapter Ref AS 351

2 x Power cord 

Invivo 9029 IV Pole

Invivo RF antena

Invivo-Millennia 3155 MVS Vital Signs Monitoring System

1X MRI ECG cable with Leads

1X Spo2 Cable 

1 x NBP hose without cuff 

2X AMP Cables.

Parameters :

Can measure, EtCO2, NBP, SpO2, EKG, IBP 

LCD: has no cuts 

Pole is equipped with 04 hangers and 43 " in height

Basket : 11 x 8 x 5 inches 

1. Sterilized : No
2. Manual : No
3. Cleaned : Yes
4. Shipping Weight  :  150 Lbs 

Stock ID : 17431 (WH 333)

Comments:

Kindly enlarge the images and see them with zooming.

Concern or query: Ask a Question

1. 1.    Overall Condition:- As seen in images  - Good 
2. 2.    Physical Condition:  Please review images before bidding : Good
3. 3.    Working Condition:   Tested at our end and seems to be working well, ECG parameter is working fine. BP is being measured as intended.  SpO2 sensor doesn't have a finger grip sensor so it records low SpO2 signals occasionally. SpO2 Red Signal intensity is intermittent so we are uncertain about it's functionality but pretty sure it would be fine with Grip sensor as we have measured SpO2 by pressing against the finger tip!    We were unable to synchornize  the remote display to the main machine, although independently both are working seamlessly.  will receive item as pictured ……………(offered AS IS)
4. 4.    “As a whole; the item has not been tested technically or professionally at our end- unable to test --- being sold STRICTLY AS IS! Biomed check is strongly recommended before clinical use!”
5. 5.    Completeness: (with everything seen in the pictures. Please look at all pictures and go through detail description before bidding.)
6. 6.    Caution for Buyers:

DESPITE WHAT MAY BE WRITTEN IN THIS LISTING ALL ITEMS ARE SOLD 'AS IS' & 'WHERE IS' AND UNLESS THE SELLER HAS INDICATED OTHERWISE, THERE WILL BE NO REFUND.

Please make sure you are ready to buy if you decide to place a bid.

Available Documentation (manual etc.): nil

Accessories: Comes with everything you see in pictures nothing more nothing less.