Invivo Precess 3160 DCU MRI...
Invivo Precess 3160 DCU MRI Monitor W/ Cart, Modules, Sensor & Lead Wires ~35014
Item specifics
- Used
- Model
- 3160
MPN- 3160 DCU
Product details
Manufacturer | Invivo Corp |
Item: | 2009 Invivo Precess 3160 DCU MRI Monitor W/ Cart, SPO2 & ECG Modules, Sensor, Lead Wires & PSU |
Model/Cat # | See Below |
Serial No. | See Below |
Made In: | USA |
Date of Manufacture: | Jan 2009 |
Voltage: 18V 1.7A
Short description...
- 1. Sale is for imaged items only.
- 2. Signs of average use with loaded parameters.
- 3. Has been tested at our end & is in good functionality.
A. Invivo Precess Master Monitor Ref 3160 DCU; SN# 509671; DOM: 2009-01
*CE# 0889 & 0413
*Power: Includes batteries (14.8V 5080mAH; 75W) Ref 989803169491
-SN: 29036TJ1 / 29029TJ (DOM: 2016-03)
*Condition of battery packs is unknown; seems to be holding charge; Recommended to install NEW
*Installed parameters: ECG; NBP; SPO2; CO2; Resp; GAS; AGENTS (P1, P2, TEMP, CO are not installed)
*Features: Equipped with ECG, SpO2, CO2, Resp installed
*Agent hardware is installed
*All softpads are responsive
*Trim knob is working
*No cracks on monitor
*LCD is bright & scratch free
*Handle is intact
*Monitor is communicating with device cart
*Time: Date is correct; time zone adjustment required.
*Settings: Adult & NEO pediatric settings.
*Printer: Installed; No paper (Untested)
*Alarms: Customizable alarm settings.
*RF Antenna is included
- B. Philips Invivo Precess Mobile Cart Ref 3160
*Modular cart for DCU monitor
*Serial Number: 41182
*DOM: Jan 2009
*Has a utility holder / caddy at back
*Has an integrated mount for pulling
*Mobile cart for Precess monitor
*Display minimal signs of usage
*Has built in NBP functionality & ETCO2 testing; NBP & CO2 are both working
*No water trap or lines included
*IBP & Temp hardware not installed on the cart
*Cart is installed with 2 batteries Ref 98980316491
-Both battery packs seem DEAD or not holding any charge
C. Invivo Precess Monitor Slave Secondary Display Ref 3160DCU is NOT INCLUDED (Can be added by buyer on his/her own discretion)
D. Philips MR Power Converter / MRI AC Adapter (Qty 1) Ref AS201
*Rating: 100-240V; 50-60Hz; 3.5A
*Output: 14.8V; 18V
*CE# 0413
*SN# 3150089
*DOM: 2008
*Has been placed on the cart W/ adhesive velcro
*Has some scratches on it
E. Ref A517B Power adapter cable
*25 feet long cable | No cuts or tears | Strain reliefs are tear free
*3 pin Male end/female end connector
F. Invivo Ref 9023 Patient Module Battery charger; 4 bay; DOM: 2008
*SN# 1541
*Has slots for 4 batteries
*Responding well; charging batteries
*No dents or cracks noted
*Enjoys excellent cosmetics
*Rating DC in 5V
- G. Philips Tectrol Ref 453563464761 Power Brick W/ UPC Output Cable Ref 453564082721
*SN# 1402C0848664-F
*DOM: 2008-05
*Rating: 100-240V 50-60Hz
*Output: 5-59V
*Power Brick PSU Power cord
H. 4X Invivo Ref 9065 Patient Module Battery Packs Rev V; 3.7V Li-Ion Polymer Battery 830mAh; 3.1Wh
*Serial Number/Condition:
1) M-143190 (Holding charge)
2) V-010280 (Holding charge but broken)
3) M-143177 & M-143151 (Both DEAD)
*DOM: 23-04-2018
*Batteries condition is unknown
*Recommended to use new batteries as battery packs degenarte in storage; although holding charge
I. Invivo Ref 9312 Patient Module ECG/EKG
*CE# 0979 & 0413
*Has some scratches & scuffs
*No dents or cracks noted; pairing with monitor
J. Invivo Ref 9224 MR ECG Wires Set
*Insulated; roughly 12-14" long
*SN# 20161010
K. Invivo Ref 9311 SPO2 Patient Module
*SN# N/A
*CE# 0979 / 0413
*Has some scratches & scuffs; pairing with monitor
*No dents or cracks noted
L. Invivo 9399B SPO2 Grip Sensor; Tested & working
*SN# 91075-010
*Roughly 3 1/2 feet long FO cable
*No cuts or tears noted on the cable
-Note: Invivo EKG Modules with MR leads & SPO2 module with grip sensor accompanied by battery pack successfully paired with master monitor; measuring SPO2 & reporting ECG
M. Hospital grade power cord
N. Invivo Expression Long 2M NBP Hose W/ UA1745 (Qty 2)
*One Adult Cuff (23-33cm) & One UO-0925 Pediatric Cuff
*Latex Free
*Tested Parameter: NBP, SPO2, ECG, CO2 ( Agent Gas & Print are untested at our end)
O. Comes with Water Trap One Gas sampling line Ref 225-3422-800
*No consumables or disposables included
*NOT LABELLED AS PATIENT READY
*Please review images and check for compatibility before bidding for the item
Package includes:-
Invivo Precess Master Monitor Ref 3160 DCU
Philips Invivo Precess Mobile Cart Ref 3160
Philips MR Power Converter / MRI AC Adapter (qty 1) Ref AS201
Ref A517B Power adapter cable
Invivo Ref 9023 Patient Module Battery charger
Philips Tectrol Ref 453563464761 Power Brick
UPC Output Cable Ref 453564082721
4X Invivo Ref 9065 Patient Module Battery Packs
Invivo Ref 9312 Patient Module ECG/EKG
Invivo Ref 9224 MR ECG Wires Set
Invivo Ref 9311 SPO2 Patient Module
Invivo 9399B SPO2 Grip Sensor
Invivo Expression Long 2M NBP Hose
3X NBP Hoses
Water Trap
Hospital grade power cord
*Items shown in photos are the items that will ship. If it is not shown in the photos, it is not included*
- 6. Sterilized : No
- 7. Manual : No
- 8. Cleaned : Yes
- 9. Shipping Weight : 300 lbs
Stock ID : 35014 (P.O 5008) (WH 66)
Comments:
Kindly enlarge the images and see them with zooming.
Concern or query: Ask a Question
Condition: USED, please refer to images for cosmetic condition.
- 1. Overall Condition:- As seen in images - Very Good
- 2. Physical Condition: Please review images before bidding : Very Good
- 3. Working Condition: Has been tested at our end & is in good functionality.....Will receive item as pictured ……………(offered AS IS)
- 4. “As a whole; the item has not been tested technically or professionally at our end- unable to test --- being sold STRICTLY AS IS! Biomed check is strongly recommended before clinical use!”
- 5. Completeness: (with everything seen in the pictures. Please look at all pictures and go through detail description before bidding.)