BC Biomedical FingerSim Pul...

Product details

Voltage:  --

Short description...

1. 1.      Sale is for imaged items only.
2. 2.   Signs of moderate use.
3. 3.   Remain untested at our end.

     *Reusable & non-sterile 

     *Start Up Kit-3 FingerSims Includes the Following:

      -1X Plastic Hand case

      -1X FingerSim Holder

      -1X FingerSim Calibration Stick; Black | 80% SpO2 Nominal 

      -1X FingerSim Calibration Stick; Blue | 90% SpO2 Nominal 

      -1X FingerSim Calibration Stick; Red | 97% SpO2 Nominal 

     *The BC Biomedical FingerSim can be used with any finger probe SpO2 monitor

     *Cosmetically in good shape 

     *Please review images and check for compatibility before bidding for the item

     Know this device before you buy!

      The BC Biomedical FingerSim™ System provides a rapid, inexpensive and convenient means of assessing the function of the entire pulse oximeter system, including the oximeter sensor. A set of three FingerSims™ are included in each kit. Each of the three FingerSims™ contain a fluid with precisely controlled light absorption characteristics which are sandwiched between two glass slides. The concentration of the substances in the three mixtures allow the FingerSim™ to mimic the light absorbing qualities of arterial blood as measured by an oximeter at different oxygen saturation values (nominally 97%, 90% and 80%). The FingerSims™ are easily identified by the color coded end caps (Red - 97%, Blue - 90% and Black - 80%). Squeezing the colored coded flat end will produce a pulsatile movement of the solution. This pulsation is detected as a pulse by the oximeter system being tested, thus allowing the oximeter to calculate and display an SpO2 value. The value corresponds to the fixed light absorbing characteristics of the particular FingerSim™ being used.

    Package includes:-

      1X FingerSim Calibration Stick; Black | 80% SpO2 Nominal 

      1X FingerSim Calibration Stick; Blue | 90% SpO2 Nominal 

      1X FingerSim Calibration Stick; Red | 97% SpO2 Nominal 

      FingerSim Holder

      Plastic Hand case

*Items shown in photos are the items that will ship.  If it is not shown in the photos, it is not included*

1. 6.        Sterilized : No
2. 7.        Manual : No
3. 8.        Cleaned : Yes
4. 9.        Shipping Weight : 30 lbs

Stock ID : 35577 (P.O 2014) (WH104 B5)

Comments:

Kindly enlarge the images and see them with zooming.

Concern or query: Ask a Question

1. 1.    Overall Condition:- As seen in images - Good
2. 2.    Physical Condition:  Please review images before bidding - Good
3. 3.    Working Condition: Remain untested at our end...will receive item as pictured ……………(offered AS IS)
4. 4.    “As a whole; the item has not been tested technically or professionally at our end- unable to test --- being sold STRICTLY AS IS! Biomed check is strongly recommended before clinical use!”
5. 5.    Completeness: (with everything seen in the pictures. Please look at all pictures and go through detail description before bidding.)